With over 50 years of spring design and manufacturing expertise, our S2 Sport Lowering Springs are engineered to improve handling while maintaining safety and ride quality.
B&G lowering springs are wound from high tensile Chromium-Silicone wire purchased from Europe’s premium mines. The lowering springs are cold wound on CNC coilers; heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell.
By redesigning the O.E. Spring and the lowering the center of gravity from 0.5-2.5 inches (depending on vehicle and application) our Technicians dramatically improve your vehicles performance and appearance. Incorporating a progressive rate design Allow B&G lowering Springs to offer higher rates for improved road hold, while maintaining a comfortable ride
- Lowering Spring applications from 0.5 – 2.5 inches
- Progressive Spring rate design to maintain ride quality while improving road feel and handling
- Cold wound from high tensile chromium silicone wire and individually super blocked and computer tested against tight tolerances
- ISO9001, QS1400, and TUV Certified
- Limited Lifetime Warranty
B&G Sport Suspension lowering Kits are designed for the enthusiast who desires a fully engineered suspension kit utilizing experience, technology, and the finest quality components. Each S2 lowering Kit is the result of 150 years of spring and 40 years of shock design and manufacturing expertise. All components of the S2 Kits are ISO and TUV Certified, and back by a Limited Lifetime Warranty.
Shocks and dampers in the S2K employ a secure gas charged twin tube design. This configuration prevents shock failure during high use and allows for separate multi-staged rebound and compression valving. The result is a superior ride that reduces pitch and roll, reacts immediately to rough surfaces and maintains a smooth and stable ride on high-speed raved roads.
S2K shocks and dampers are valved to work in harmony with the matched B&G lowering springs. The result is a complete suspension solution with the ultimate in ride quality and performance.
- Matched spring rates and shock valving provide the ultimate in ride quality and performance.
- Shocks and dampers offer separate multi-staged rebound and compression that reacts immediately to rough surface and maintains a smooth and stable ride at high speed.
- Fully engineered suspension kit utilizing experience, technology, and the finest quality components.
- Limited Lifetime Warranty
B&G Coilovers are designed and produced exclusively by world class technicians. Each application combines race proven technology with the vehicles unique design characteristics for the ultimate in ride, handling, and comfort.
RS2 Coilovers put you in complete control with 18 levels of external dampening control (combination of Rebound and compression). Featuring monotube gas charge dampers for quick response and steering control, and a low bleed system to maintain ride quality during normal driving conditions. RS2 incorporates separate adjustments for damper length and spring perch height to allow extreme lowering with full shock travel. For street driving to occasional track use, RS2 Coilovers allow you to dial in the optimal ride height and dampening force for any driving environment.
- Adjusts height from 1-3.5 inches (Lowering may vary depending on application)
- 18 way adjustable dampening (combination of rebound and compression)
- Monotube gas charge dampers
- High strength anodized aluminum alloy and powder coated steel components
- Full length height adjustment with separate settings for damper force and spring pre-tension
- Limited Lifetime Warranty
